International Cruiser 250 Antifoul – 3L
Sale!$66.48Current price is: $66.48. Original price was: $132.95.
Product Description
- Description
Description
International Cruiser 250 is a polishing antifouling, resulting in consistent antifouling performance while the boat is motion. Offers year-round protection, in all but the worst fouling areas. Use antifouling paints safely. Always read the label and product information before use.
Features
- Offers a full year’s protection
- Protects against all kinds of fouling
- Suitable for both powerboats and sailboats
Specification
- Brand: International
- Capacity: 3L
- Area: Below the Waterline
- Suitable for: Hull
- Finish/Sheen: Matt
- Type of Antifouling: Ablative
- Suitable Water Types: Sea Water, Fresh Water, Brackish Water
- Substrates: Epoxy Composite / Carbon Fibre, Cast Iron, GRP/FRP, Lead, Steel, Wood
- Application Method: Brush, Roller
- Recommended Number of Coats: 2 – 3
- Practical Coverage: 9 m/L
- Typical Shelf Life: 2 Years
Colours Avaliablity
- Dover White
- Red
- Blue
- Navy
- Black
Preparation
PREVIOUSLYPAINTEDSURFACE
- In Good Condition: All fouling and contamination must be thoroughly removed including the leached layer. Use high pressure fresh water wash (3000 psi/207 bar) and/or scraping and wet sanding with typically 80120 grade paper. Do not dry sand. If old antifouling is incompatible or unknown, seal with suitable International Paint barrier/sealer coat.
- InPoorCondition:UseInterstriptoremovealltracesofantifouling.
PRIMING:Allpreparationforbaresubstratesiscoveredontheappropriateprimerdatasheet.
BAREGRP:PrimewithGelshield200forosmosisprotection,orPrimoconorInterprotect.
STEEL/IRON/LEAD/WOOD:PrimewithInterprotectorPrimocon.
PLYWOOD:PrimewithEpiglassfollowedbyInterprotect.
Hints
- Mixing:Thoroughlystiruntilproductismixedtoauniformconsistencybeforeuse.
- Thinning:Thinningisnotrecommended.Antifoulingperformancecanbecompromisedifcorrectdryfilmthicknessisnot applied.
- Cleaner:YTA085InternationalAntifoulingThinner#3.
- VentilationandHumidityControl:Ensureadequateventilationduringuse.
- Other:Antifoulingsshouldonlybewetsanded.Neverdrysandorburnoffoldantifouling.Truecolourwilldevelopafter immersion
Hazard Warnings
Hazard Pictogram : | |
Signal Word: | Danger |
Hazard Statements: |
Flammable liquid and vapour |
Precautionary Statement: | General:
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Response: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations. |
Hazardous Ingredients |
All White: Dicopper Oxide, Rosin, Fatty Acids, C18-unsatd, Trimers, Compds. with Oleylamine, Fatty Acids, Tall-oil, compds. with Oleylamine. |
Supplemental Label Elements |
Wear appropriate respirator when ventilation is inadequate |
Technical Files
Technical Data Sheet
Dover White – Safety Data Sheet
Red – Safety Data Sheet
Blue – Safety Data Sheet
Navy – Safety Data Sheet
Black – Safety Data Sheet
View AllClose