International Gelshield 200 Epoxy Primer – 2.5L
Sale!$80.48Current price is: $80.48. Original price was: $160.95.
Product Description
- Description
Description
International Gelshield 200 is a quick drying and easy to apply epoxy primer, that protects GRP against osmosis. You can use it down to just 5C and as its fast drying, you can apply multiple coats in one day.
Features
- Provides protection against osmosis in five coats (250 m).
- Its fast dry times means you can apply multiple coats in one day
- Very easy to apply and can be used down to 5C
Specification
- Brand: International
- Capacity: 2.5L
- Area: Above the Waterline Below the Waterline
- Suitable for: Hull
- Finish/Sheen: Matt
- Substrates: GRP/FRP
- Application Method: Brush, Roller
- Recommended Number of Coats: 5
- Practical Coverage (Brush Roller): 8.10 m/L
- Typical Shelf Life: 2 Years
Colour Avaliablity
- Green
- Grey
Preparation
- BARE GRP Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper.
- PREVIOUSLY ANTIFOULED SURFACE Remove using Interstrip. Wash down with Super Cleaner, rinse with fresh water and allow to dry. Sand with 180 grade (grit) paper.
- EXPOSEDLAMINATE Gelshield Plus is a high build epoxy primer best suited for bare laminate.
Method
Remove any dust from the surface. Apply required number of coats, detailed in the specification sheets (minimum 250 microns DFT). For ease, alternate the grey and green colours starting and ending with grey. BILGES: Apply 2 coats only provided there is a gelcoat on the inside of the hull. If no gelcoat, use Gelshield Plus.
Hints
- Mixing: Stir or shake individual components thoroughly. Add Curing Agent to the Base, stir and leave for 10 minutes to allow bubbles to disperse.
- Thinner: YTA061 Thinners No.7
- Other: Can be used down to 5C but for maximum performance, temperature should be above 10C.
Hazard Warnings
Hazard Pictogram : | |
Signal Word: | Danger |
Hazard Statements: |
Flammable liquid and vapour |
Precautionary Statement: | General:
Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Prevention: Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Response: IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Take off contaminated clothing and wash it before reuse. IF IN EYES: Immediately call a POISON CENTER or physician. Storage: Keep cool. Disposal: Dispose of contents and container in accordance with all local, regional, national and international regulations. |
Hazardous Ingredients |
Green , GreyReaction product: bisphenol-A-(epichlorhydrin) and epoxy resin, 700 |
Supplemental Label Elements |
Wear appropriate respirator when ventilation is inadequate. |
Technical Files
Technical Data Sheet
Green Part A – Safety Data Sheet
Green Part B – Safety Data Sheet
Grey Part A – Safety Data Sheet
Grey Part B – Safety Data Sheet
View AllClose