International Primocon Antifoul Primer – Grey – 2.5L

International Primocon Antifoul Primer – Grey – 2.5L

Sale!

Current price is: $46.48. Original price was: $92.95.

Current price is: $46.48. Original price was: $92.95.

Add to cart
Buy Now
SKU: xjcgjjyo89i Category:

Product Description

  • Description

Description

International Primocon is a fast drying, one-part primer for use below the water line before antifouling is applied. Formulated for timber, steel, aluminium, cast iron keels and lead keels.

Features

  • An aluminium pigmented, vinyl anti-corrosive primer than can be recoated ith itself after long periods
  • Quick drying even in poor conditions
  • Can be applied by brush, roller or spray

Specification

  • Brand: International
  • Capacity: 2.5L
  • Area: Below the Waterline
  • Suitable for: Hull, Propeller, Drive
  • Finish/Sheen: Matt
  • Substrates: Aluminium/Zinc-Galvanised Steel, Epoxy Composite/Carbon Fibre, GRP/FRP, Lead, Steel, Wood
  • Application Method: Airless Spray, Brush, Roller
  • Suitable for Aluminium Propellers: Yes
  • Recommended Number of Coats: 1 – 5
  • Practical Coverage (Brush Roller): 7.40 m/L
  • Practical Coverage (Spary): 5 m/L
  • Typical Shelf Life: 2 Years

Colour Availablity

  • Grey

Preparation

PREVIOUSLYANTIFOULEDSURFACE

  • InGoodCondition: Removeloosematerial.Washdownwithfreshwater.Allowtodry.
  • InPoorCondition: Removeusing International Interstrip.

WashallsurfacesexceptSTEELwithSuperCleaner.

BAREGRP: Sandusing180220grade(grit)paper.

BAREWOOD/PLYWOOD: Sand smooth with 80180 and then 280 grade paper. Remove sanding dust by brushing, dusting and wiping. If wiping with solvent then allow to dry completely before applying products recommended for application direct to wood (see specific coating systems).

ALUMINIUM: Degrease with solvent or Super Cleaner. Sand well using 24120 grade (aluminium compatible) paper. Coarser grades are recommended to achieve optimum adhesion. Clean thoroughly and allow to dry. Preprime using an International primer as soon as possible (within 8 hours) as detailed for specific coating systems.

ZINC/GALVANISEDSTEEL: Degrease with solvent or Super Cleaner. Sand well using 60120 grade paper. Clean thoroughly and allow to dry completely. Pre prime using an International primer as detailed for specific coating systems.

LEAD: Degrease with solvent or Super Cleaner. Sand well using 120 grade paper or power wire brush. Clean thoroughly and allow to dry. Pre prime using an International primer as detailed for specific coating systems.

STEEL: Gritblast to Sa 2 near white metal surface. If gritblasting is not possible, grind the metal surface with 2436 grit abrasive discs to a uniform, clean, bright metal surface with a 5075 microns anchor pattern. Use angle grinder on small areas. Preprime with Primocon thinned 1015% with Thinners No.3.

Method

Iffillingisrequired,useappropriatefillerafterthefirstcoatofPrimoconhasbeenapplied.Before painting,removeany dustwithadustwipe.MixingStirwellbeforeuse.

Applythefollowingnumberofcoats:

  • GRP -1,
  • Wood/Plywood -3,
  • Aluminium/Alloy/Zinc/GalvanisedSteel/Lead/Steel -5,
  • Barrier/Sealercoat -1.

Hints

  • Mixing: Stir well before use
  • Thinner:YTA085ThinnersNo.3
  • Cleaner:YTA085ThinnersNo.3

Hazard Warnings

Hazard Pictogram :
Signal Word: Warning
Hazard Statements:

Flammable liquid and vapour
May cause respiratory irritation
May cause drowsiness or dizziness
May cause damage to organs through prolonged or repeated exposure
Toxic to aquatic life with long lasting effects

Precautionary Statement: General:

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Prevention:

Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Do not breathe vapour.

Response:

IF INHALED: Remove person to fresh air and keep comfortable for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.

Storage:

Keep cool.

Disposal:

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Hazardous Ingredients

Grey: Aromatic Hydrocarbons, C9, Solvent Naphtha (petroleum), Medium Aliph.

Supplemental Label Elements

Repeated exposure may cause skin dryness or cracking.
Wear appropriate respirator when ventilation is inadequate.

Technical Files

Technical Data Sheet

Grey – Safety Data Sheet

View AllClose